Forums » Support

How to Fix an Infinite Reboot Loop in Windows 10

    • 128 posts
    January 24, 2020 1:18 AM PST

    You might be aware that in the earlier Windows version, it used to take a complete reinstall or else other many things to do. Fortunately, the makers of Windows 10 device did observe such things, and now in Windows 10, things have been made simpler for dealing with the reboot loop. To know about the boot loop of Windows 10, see this blog carefully.

    Reasons behind the boot loop of Windows 10

    • The Windows Update
    • The updated or else new Windows driver
    • The installation of any software

    Fixing a Windows Update based boot loop

    1. Firstly, write ‘net stop wuauserv’ into the Command Prompt with the ‘net stop bits.’
    2. Then, give some time for the reply to come up.
    3. After that, browse c:\Windows\SoftwareDistribution. Into this place, remove each of the directory items.
    4. Lastly, require restarting the device of your Windows 10. It shall boot up normally.

    Booting loop issues on the device of Windows 8

    1. Over here, you shall get access to the ‘Advanced Options’ menu.
    2. Note that you need to search the Startup Options.
    3. Lastly, press on the ‘Enable Safe Mode.’

    Any application or Game might be the reason

    If the boot loop is because of the installation of any application, such as the game that you have got recently, then you require removing the software.

    1. Firstly, search the software into the Start menu.
    2. Then, do a right-click on it.
    3. After that, select Uninstall.
    4. Lastly, whenever you restart the device of your Windows 10, note that the fixation of the boot loop has occurred.

    Manually accessing Safe Mode

    1. Firstly, keep pressing Shift.
    2. Next, tap on Start.
    3. After that, tap on Restart for booting Windows 10 to Advanced startup options.
    4. Then, you shall be able to launch Settings by putting the combination of Windows+I buttons on your keyboard.
    5. After that, tap on Update and Security.
    6. Then, press on Recovery.s
    7. Next, tap on Advanced startup.
    8. Then, press on Restart now.
    9. Into the elevated Command Prompt, but shutdown/r/o for rebooting the device to the Advanced Boot Options.

    Stopping Boot Loops Hardware Driver

    1. Do a right-click on the Start option.
    2. Then, press on the Device Manager.
    3. Next, look for the suspect device.
    4. After that, you need to do right-click the device.
    5. Next, tap on Properties.
    6. Then, press on Drivers.
    7. After that, tap on Roll Back Driver.
    8. Still, if things did not work out, turn off as well as uninstall the driver. Choose the device, right-click as well as Disable Device and Uninstall Driver.
    9. Lastly, restart the device.

    James is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cybersecurity, cryptography, malware, social engineering, internet, and new media. She writes for Norton security products at Norton setupmcafee.com/activatenorton.com/setup.